Get IPv6 address by NAT6 in OpenWRT

脚本适用于原版OpenWRT，LEDE和PandoraBox固件，保证设备为出厂设置，仅配置了正常联网

若可以打开https://raw.githubusercontent.com/FunctionXJB/NAT6/master/ipv6.sh 则直接运行下面一条命令进行安装配置

##安装运行##

wget https://raw.githubusercontent.com/XJBFunction/NAT6/master/ipv6.sh
chmod -x ipv6.sh
sh ipv6.sh

否则，手动下载包，将ipv6.sh和nat6文件复制进路由器，并在相应目录运行

chmod -x ipv6.sh
sh ipv6.sh