update image

Author: bowenjw

docs/docs/blade/compatibility/switch.md

@@ -1,5 +1,6 @@
-# Network Switchs & PoE Injectors 
+# Network Switchs & PoE Injectors
 
+PoE enabled switch & Injectors which have been used with the Compute Blade
 
 ## Cisco 
 | Product                       | Model Number              | Tested By |

docs/docs/blade/getting-started/assembly.mdx

@@ -36,7 +36,7 @@ Next press firmly until the pieces snap together.
 Be sure to assemble the two parts correctly; it is difficult to separate them and can damage the latch.
 :::
 
-<img src="/img/blade/latch-assembled.png" alt="Latch is now assembled" width={'70%'}/>
+<img src="/img/blade/latch-assembled.webp" alt="Latch is now assembled" width={'70%'}/>
 
 With the Latch assembled it can be secured to the blade. Using a PH1 screw driver, take the two M3x6 screws and secure the latch to the blade.
 

docs/docs/blade/index.mdx

@@ -26,7 +26,7 @@ The Compute Blade comes in three different hardware variants.
     <TabItem value="dev" label="DEV">
         <h2>Dev Compute Blade</h2>
         <table>
-            <tbody>
+            <tbody className='span-table'>
                 <tr>
                     <td rowSpan={2}>Compatibility</td>
                     <td>Raspberry Pi Compute Module 4 / 4 Lite</td>
@@ -35,7 +35,7 @@ The Compute Blade comes in three different hardware variants.
                     <td>Raspberry Pi Compute Module 4 Compatible Boards</td>
                 </tr>
             </tbody>
-            <tbody>
+            <tbody className='span-table'>
                 <tr>
                     <td rowSpan={3}>Storage</td>
                     <td>M.2 NVMe SSD up to 22110</td>
@@ -269,7 +269,7 @@ The design of the Fan Units provides robustness and reliability:
 in the event of one Compute Blade being disconnected or failing,
 the Fan Unit will continue to operate, maintaining effective cooling for the remaining blade.
 
-<img src="/img/blade/mk4-thermal.svg" alt="mk4 thermal flow" width={'100%'}/>
+<img src="/img/blade/mk4-thermal.webp" alt="mk4 thermal flow" width={'100%'}/>
 
 :::warning
 The Compute blade has not been validated without the addition of the [Fan Unit](/fan-unit/) and [BladeRunner™️](/bladerunner/)