Skip to main content
Springer Nature Link
Log in

QAM Modulation Based on Lowest Energy Consumption in Passive CRFID

  • Published:
Automatic Control and Computer Sciences Aims and scope Submit manuscript

Abstract

Energy consumption and lacking of spectrum resources have become the bottleneck in the development of the Internet of Things. Reducing energy consumption in RFID tags is an important issue that needs to be studied in the communication links. The modulation module in the tag consumes as little energy as possible and applies most of the collected energy to the tag the IC. In order to increase the communication efficiency in the passive system, it is necessary to optimize the modulation mode of the traditional passive RFID. The traditional modulation method cannot collect the energy effectively and transmit the data accurately. In this pursuit, the present study was envisaged to improve the situation by using QAM modulation instead of traditional modulation, and provide a new possibility for the application of CRFID. Furthermore, the transmission quality of signals under different channels was compared. In the experiment simulation stage, the QAM modulation simulation module was established, and the energy of the tag IC was maximized when the modulation impedance was greater than half of the impedance of the tag antenna.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.
Fig. 7.
Fig. 8.
Fig. 9.
Fig. 10.
Fig. 11.
Fig. 12.

Similar content being viewed by others

REFERENCES

  1. Abd Allah, O., Abdalla, S., Mekki, M., and Awadallah, A., RFID based access control and registration system, 2018 Int. Conf. on Computer, Control, Electrical, and Electronics Engineering (ICCCEEE), Khartoum, Sudan, 2018, IEEE, 2018, pp. 1–4. https://doi.org/10.1109/ICCCEEE.2018.8515794

  2. Zhao, J., Xue, F., and Li, D., Intelligent management of chemical warehouses with RFID systems, Sensors, 2020, vol. 20, no. 1, p. 123. https://doi.org/10.3390/s20010123

    Article  Google Scholar 

  3. Bilodeau, J.-S., Bouzouane, A., Bouchard, B., and Gaboury, S., An experimental comparative study of RSSI-based positioning algorithms for passive RFID localization in smart environments, J. Ambient Intell. Humanized Comput., 2017, vol. 9, pp. 1327–1343. https://doi.org/10.1007/s12652-017-0531-3

    Article  Google Scholar 

  4. Jiang, C., He, Yu., Yang, S., Guo, J., and Liu, Yu., 3D-OmniTrack: 3D tracking with COTS RFID systems, Proc. 18th Int. Conf. on Information Processing in Sensor Networks, Montreal, 2019, New York: Association for Computing Machinery, 2019, pp. 25–36. https://doi.org/10.1145/3302506.3310386

  5. Cheng, K., Ye, N., Malekian, R., and Wang, R., In-air gesture interaction: Real time hand posture recognition using passive RFID tags, IEEE Access, 2019, vol. 7, pp. 94460–94472. https://doi.org/10.1109/access.2019.2928318

    Article  Google Scholar 

  6. Liu, W., Wang, J., Li, B., and Wang, L., Enabling fine-grained shopping behavior information acquisition with dual RFID tags, IEEE Internet Things J., 2020, vol. 7, no. 8, pp. 7539–7549. https://doi.org/10.1109/jiot.2020.2985852

    Article  Google Scholar 

  7. Leedham, M., Lillis, T., and Twiner, A., Creating a corpus of sensitive and hard-to-access texts: Methodological challenges and ethical concerns in the building of the WiSP Corpus, Appl. Corpus Linguist., 2021, vol. 1, no. 3, p. 100011. https://doi.org/10.1016/j.acorp.2021.100011

    Article  Google Scholar 

  8. Wang, S., Yi, Yu., and Liu, N., Multi-objective optimization (MOO) for high-rise residential buildings’ layout centered on daylight, visual, and outdoor thermal metrics in China, Building Environ., 2021, vol. 205, p. 108263. https://doi.org/10.1016/j.buildenv.2021.108263

    Article  Google Scholar 

  9. Li, Q., Anwar, R., Ning, H., Wang, J., and Mao, L., Electromagnetic spectrum chipless radio frequency identification: A review, Digital Commun. Networks, 2020, vol. 6, no. 3, pp. 377–388. https://doi.org/10.1016/j.dcan.2019.12.002

    Article  Google Scholar 

  10. Nagaraj, S. and Sarkar, M., Orthogonal channelization of backscattering tags using golay complementary sequences, Int. Symp. on Advanced Networks and Telecommunication Systems, Indore, India, 2018, IEEE, 2018, pp. 1–4. https://doi.org/10.1109/ANTS.2018.8710103

  11. Greene, C.E., Shearer, J.G., and Harrist, D.W., Pulse transmission method, US Patent 2007/0149162 A1, 2007.

  12. Modonesi, R., Dalai, M., Migliorati, P., and Leonardi, R., A note on probabilistic and geometric shaping for the AWGN channel, IEEE Commun. Lett., 2020, vol. 24, no. 10, pp. 2119–2122. https://doi.org/10.1109/LCOMM.2020.3001253

    Article  Google Scholar 

  13. Lahoud, S., Khawam, K., Martin, S., Feng, G., Liang, Zh., and Nasreddine, J., Energy-efficient joint scheduling and power control in multi-cell wireless networks, IEEE J. Sel. Areas Commun., 2016, vol. 34, no. 12, pp. 3409–3426. https://doi.org/10.1109/JSAC.2016.2611847

    Article  Google Scholar 

  14. Hannan Mahammad, A. and Muhammad, I., Modulation techniques for RFID transceiver using software defined radio, Int. J. Innovative Comput., Inf. Control, 2012, vol. 8, no. 10 A, pp. 6667–6692.

  15. Selvakumar, S., Ravi, S., and Vinoth, M., DPSK and QAM modulation detectionanalyzed with BER estimation, Second Int. Conf. on Current Trends In Engineering and Technology - ICCTET 2014, Coimbatore, India, 2014, IEEE, 2014, pp. 18–25. https://doi.org/10.1109/icctet.2014.6966257

Download references

Funding

The study was supported by the Shanxi Province Education Science “14th Five-Year Plan” Project (GH-21071): Research and cultivation of “craftsman spirit” under the guidance of vocational college skills competition.

Author information

Authors and Affiliations

  1. College of Mechanical and Vehicle Engineering, Taiyuan University of Technology, 030024, Taiyuan, China

    Jia Liu

  2. Department of Electronic Information Engineering, Shanxi Polytechnic College, 030006, Taiyuan, China

    Jia Liu

Authors
  1. Jia Liu
    View author publications

    You can also search for this author inPubMed Google Scholar

Corresponding author

Correspondence to Jia Liu.

Ethics declarations

The author declares that he has no conflicts of interest.

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Jia Liu QAM Modulation Based on Lowest Energy Consumption in Passive CRFID. Aut. Control Comp. Sci. 57, 608–618 (2023). https://doi.org/10.3103/S0146411623060044

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S0146411623060044

Keywords: