Abstract
Automobile industries worldwide are unified in opinion, that successful management of sustainable supply chains is the most important driver to improve both their economic and ecological performances. The significance of sustainable supply chain management (SSCM) is a critical corporate matter in the automobile industries that offers incredible potential for achieving better environmental performance, consumer fulfillment, pull down operating expenditures, reducing inventory investments in addition to achieving better fixed asset usage. The environment concerns, climatic changes, and additional ecological concerns in automobile industries are not only articulated by campaigners or researchers, but also by the common man as well, which has motivated the industries to focus on sustainability. The present research focuses on a DEA-based mathematical model and employs differential evolution to select the competent suppliers providing the utmost fulfillment for the sustainable criteria determined. This study aims to examine the sustainable supplier evaluation and selection practices likely to be adopted by the Indian automobile industry for their products.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Jayal, A.D., Badurdeen, F., Dillon, Jr., O.W., Jawahir, I.S.: Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels. CIRP J. Manufact. Sci. Technol. 2(3), 144–152 (2010)
Floridi, M., Pagni, S., Falorni, S., Luzzati, T.: An exercise in composite indicators construction: Assessing the sustainability of Italian regions. Ecol. Econ. 70(8), 1440–1447 (2011)
Luthe, T., Schuckert, M.: Socially responsible investing–implications for leveraging sustainable development. In: Trends and Issues in Global Tourism 2011 (pp. 315–321). Springer Berlin Heidelberg (2011)
Paoletti, M.G., Gomiero, T., Pimentel, D.: Introduction to the special issue: towards a more sustainable agriculture. Crit. Rev. Plant Sci. 30(1–2), 2–5 (2011)
Büyüközkan, G., Çifçi, G.: A novel fuzzy multi-criteria decision framework for sustainable supplier selection with incomplete information. Comput. Ind. 62(2), 164–174 (2011)
Genovese, A., Koh, S.L., Bruno, G., Bruno, P.: Green supplier selection: a literature review and a critical perspective. In: 8th International Conference on Supply Chain Management and Information Systems (SCMIS), 2010 pp. 1–6. IEEE, Oct 2010
Purdy, L., Safayeni, F.: Strategies for supplier evaluation: a framework for potential advantages and limitations. IEEE Trans. Eng. Manage. 47(4), 435–443 (2000)
Storn, R., Price, K.: Differential evolution-a simple and efficient adaptive scheme for global optimization over continuous spaces. Berkeley: ICSI, CA, Technical Report TR-95-012 (1995)
Plagianakos, V.P., Tasoulis, D.K., Vrahatis, M.N.: A review of major application areas of differential evolution. In: Advances in Differential Evolution, pp. 197–238. Springer, Berlin Heidelberg (2008)
Wang, F., Jang, H.J.: Parameter estimation of a bioreaction model by hybrid differential evolution. In: Proceedings of the 2000 Congress on Evolutionary Computation, 2000, vol. 1, pp. 410–417. IEEE (2000)
Joshi, R., Sanderson, A.C.: Minimal representation multisensor fusion using differential evolution. IEEE Trans. Syst. Man Cybern. Part A Syst. Hum. 29(1), 63–76 (1999)
Ilonen, J., Kamarainen, J.K., Lampinen, J.: Differential evolution training algorithm for feed-forward neural networks. Neural Process. Lett. 17(1), 93–105 (2003)
Ali, M., Siarry, P., Pant, M.: An efficient differential evolution based algorithm for solving multi-objective optimization problems. Eur. J. Oper. Res. 217(2), 404–416 (2012)
Jauhar, S., Pant, M., Deep, A.: Differential evolution for supplier selection problem: a DEA based approach. In: Proceedings of the Third International Conference on Soft Computing for Problem Solving, pp. 343–353. Springer India, Jan 2014
Parker, P.: Environmental initiatives among japanese automakers: new technology, EMS, recycling and lifecycle approaches. Environ.: J. interdiscip. Stud. 29(3) (2001)
Kearney, A.T.: Building world class supply chain in India, Conference on Auto Supply Chain Management, 2013. www.atkearney.com. Accessed 23 Nov 2014
SIAM India—Society of Indian Automobile Manufacturers (SIAM). www.siamindia.com.Accessed. Accessed 18 Jan 2014
Bhattacharya, S., Mukhopadhyay, D., Giri, S.: Supply chain management in indian automotive industry: complexities, challenges and way ahead. Int. J. Managing Value Supply Chains 5(2) (2014)
Nieuwenhuis, P., Wells, P.: The Automotive Industry and The Environment: A Technical, Business and Social Future, Woodhead, Cambridge. 2003, Elsevier (2003)
Agarwal, P., Sahai, M., Mishra, V., Bag, M., Singh, V.: A review of multi-criteria decision making techniques for supplier evaluation and selection. Int. J. Ind. Eng. Comput. 2(4), 801–810 (2011)
Weber, C.A., Current, J.R., Benton, W.C.: Vendor selection criteria and methods. Eur. J. Oper. Res. 50(1), 2–18 (1991)
Degraeve, Z., Labro, E., Roodhooft, F.: An evaluation of vendor selection models from a total cost of ownership perspective. Eur. J. Oper. Res. 125(1), 34–58 (2000)
Jauha, S.K., Pant, M.: Recent trends in supply chain management: a soft computing approach. In: Proceedings of Seventh International Conference on Bio-Inspired Computing: Theories and Applications (BIC-TA 2012), pp. 465–478. Springer India, Jan 2013
De Boer, L., Labro, E., Morlacchi, P.: A review of methods supporting supplier selection. Eur. J. Purchasing Supply Manage. 7(2), 75–89 (2001)
Holt, G.D.: Which contractor selection methodology? Int. J. Project Manage. 16(3), 153–164 (1998)
Aamer, A.M., Sawhney, R.: Review of suppliers selection from a production perspective. In: Proceedings of the IIE Annual Conference and Exhibition, pp. 2135–2140 (2004)
Ho, W., Xu, X., Dey, P.K.: Multi-criteria decision making approaches for supplier evaluation and selection: A literature review. Eur. J. Oper. Res. 202(1), 16–24 (2010)
Tahriri, F., Osman, M.R., Ali, A., Yusuff, R.M.: A review of supplier selection methods in manufacturing industries. Suranaree J. Sci. Technol. 15(3), 201–208 (2008)
Jauhar, S.K., Pant, M.: Genetic algorithms, a nature-inspired tool: review of applications in supply chain management. In: Proceedings of Fourth International Conference on Soft Computing for Problem Solving, pp. 71–86. Springer India, Jan 2015
Cheraghi, S.H., Dadashzadeh, M., Subramanian, M.: Critical success factors for supplier selection: an update. J. Appl. Bus. Res. (JABR) 20(2) (2011)
Noci, G.: Designing ‘green’vendor rating systems for the assessment of a supplier’s environmental performance. Eur. J. Purchasing Supply Manage. 3(2), 103–114 (1997)
Zhu, Q., Geng, Y.: Integrating environmental issues into supplier selection and management. Greener Manage. Int. 2001(35), 26–40 (2001)
Jauhar, S.K., Pant, M., Deep, A.: An approach to solve multi-criteria supplier selection while considering environmental aspects using differential evolution. In: Swarm, Evolutionary, and Memetic Computing, pp. 199–208. Springer International Publishing (2013)
Lai, Y.F.: Green supplier evaluation in green supply chain management—examples of printed circuit board suppliers. Unpublished Master’s Thesis, Department of Resource Engineering, National Cheng-Kung University, Taiwan (in Chinese) (2004)
Seuring, S., Müller, M.: Core issues in sustainable supply chain management—a Delphi study. Bus. Strategy Environ. 17(8), 455–466 (2008)
Awasthi, A., Chauhan, S.S., Goyal, S.K.: A fuzzy multicriteria approach for evaluating environmental performance of suppliers. Int. J. Prod. Econ. 126(2), 370–378 (2010)
Jauhar, S.K., Pant, M., Abraham, A.: A novel approach for sustainable supplier selection using differential evolution: a case on pulp and paper industry. In: Intelligent Data analysis and its Applications, vol. II, pp. 105–117. Springer International Publishing (2014)
Buyukozkan, G., Çifci, G.: A novel hybrid MCDM approach based on fuzzy DEMATEL, fuzzy ANP and fuzzy TOPSIS to evaluate green suppliers. Expert Syst. Appl. 39, 3000–3011 (2012)
Kannan, D., Khodaverdi, R., Olfat, L., Jafarian, A., Diabat, A.: Integrated fuzzy multi criteria decision making method and multi-objective programming approach for supplier selection and order allocation in a green supply chain. J. Clean. Prod. 47, 355–367 (2013)
Falatoonitoosi, E., Ahmed, S., Sorooshian, S.: A multicriteria framework to evaluate supplier’s greenness. In: Abstract and Applied Analysis, vol. 2014. Hindawi Publishing Corporation, March 2014
Yazdani, M.: An integrated MCDM approach to green supplier selection. Int. J. Ind. Eng. Comput. 5(3), 443–458 (2014)
Jalhar, S.K., Pant, M., Nagar, M.C.: Differential evolution for sustainable supplier selection in pulp and paper industry: a DEA based approach. Comput. Methods Mater. Sci. 15 (2015)
Simpson, D.F., Power, D.J.: Use the supply relationship to develop lean and green suppliers. Int. J. Supply chain manage. 10(1), 60–68 (2005)
Lee, S.Y., Klassen, R.D.: Drivers and Enablers That Foster Environmental Management Capabilities in Small-and Medium-Sized Suppliers in Supply Chains. Prod. Oper. Manage. 17(6), 573–586 (2008)
Weele, A.J.: Purchasing and Supply Chain Management. Cengage Learning EMEA, Andover, UK (2010)
Scannell, T.V., Vickery, S.K., Droge, C.L.: (2000). Upstream supply chain management and competitive performance in the automotive supply industry. J. Bus. Logistics 21(1)
Awaysheh, A., Klassen, R.D.: The impact of supply chain structure on the use of supplier socially responsible practices. Int. J. Oper. Prod. Manage. 30(12), 1246–1268 (2010)
Geffen, C.A., Rothenberg, S.: Suppliers and environmental innovation: the automotive paint process. Int. J. Oper. Prod. Manage. 20(2), 166–186 (2000)
Klassen, R.D., Vachon, S.: Collaboration and evaluation in the supply chain: the impact on plant-level environmental investment. Prod. Oper. Manage. 12(3), 336–352 (2003)
Despotis, D.K., Stamati, L.V., Smirlis, Y.G.: Data envelopment analysis with nonlinear virtual inputs and outputs. Eur. J. Oper. Res. 202(2), 604–613 (2010)
Ramanathan, R. (ed.): A Tool for Performance Measurement. Sage Publication Ltd., New Delhi (2003)
Wen, U.P., Chi, J.M.: Developing green supplier selection procedure: a DEA approach. In: 17th International Conference on Industrial Engineering and Engineering Management (IE&EM), 2010 IEEE, pp. 70, 74, 29–31 Oct 2010. doi:10.1109/ICIEEM.2010.5646615
Dobos, I., Vörösmarty, G.: Supplier selection and evaluation decision considering environmental aspects. sz. Mőhelytanulmány, HU ISSN 1786–3031, Oct 2012
Kumar, P., Mogha, S.K., Pant, M.: Differential evolution for data envelopment analysis. In: Proceedings of the International Conference on Soft Computing for Problem Solving (SocProS 2011) Dec 20–22, 2011, pp. 311–319, Springer India, Jan 2012
Srinivas, T.: Data envelopment analysis: models and extensions. In: Production/Operation Management Decision Line, pp. 8–11 (2000)
Charnes, A., Cooper, W.W., Rhodes, E.: Measuring the efficiency of decision making units. Eur. J. Oper. Res. 2(6), 429–444 (1978)
Banker, R.D., Charnes, A., Cooper, W.W.: Some models for estimating technical and scale inefficiencies in data envelopment analysis. Manage. Sci. 30(9), 1078–1092 (1984)
Rogalsky, T., Derksen, R.W., Kocabiyik, S.: Differential evolution in aerodynamic optimization. In: Proceedings of 46th Annual Conference, Canadian Aeronautics Space Institute, pp. 29–36 (1999)
Joshi, R., Sanderson, A.C.: Minimal representation multi-sensor fusion using differential evolution. IEEE Trans. Syst. Man Cybernetics. Part A 29, 63–76 (1999)
Ray, T., Kang, T., Chye, S.K.: An evolutionary algorithm for constrained optimization. In: Whitley, D., Goldberg, D., Cantu-Paz, E., Spector, L., Parmee, I., Beyer, H.G. (eds.) Proceeding of the Genetic and Evolutionary Computation Conference (GECCO 2000), pp. 771–777 (2000)
Shirouyehzad, H., Lotfi, F.H., Dabestani, R.: A data envelopment analysis approach based on the service qualtiy concept for vendor selection. In: International Conference on Computers & Industrial Engineering, 2009. CIE 2009, pp. 426–430. IEEE, July 2009
http://www.london2012.com/documents/locog-publications/locog-guidelines-on-carbon-emissions-of-products-and-services.pdf. Accessed 12 Oct 2013
Cooper, W.W., Seiford, L.M., Tone, K.: Data envelopment analysis: a comprehensive text with models, applications, references and DEA-Solver Software. Second editions. Springer (2007). ISBN: 387452818, 490
Ansari, I.A, Pant, M., Neri, F.: Analysis of gray scale watermark in RGB host using SVD and PSO. In: IEEE Computational Intelligence for Multimedia, Signal and Vision Processing (CIMSIVP), pp. 1–7 (2014)
Zaheer, H., Pant, M., Kumar, S., Monakhov, O., Monakhova, E., Deep, K.: A new guiding force strategy for differential evolution. Int. J. Syst. Assur. Eng. Manag. 1–14 (2015), doi:10.1007/s13198-014-0322-6
Ansari, I.A., Pant, A., Ahn, C.W.: SVD based fragile watermarking scheme for tamper localization and self-recovery. Int. J. Mach. Learn. Cyber. 1–15 (2015), doi:10.1007/s13042-015-0455-1
Zaheer, H., Pant, M.: A differential evolution approach for solving integer programming problems. In: Proceedings of Fourth International Conference on Soft Computing for Problem Solving, pp. 413–424. Springer India (2015)
Ansari, I.A., Pant, A., Ahn, C.W.: Robust and false positive free watermarking in IWT domain using SVD and ABC. Eng. Appl. Artif. Intell. 49, 114–125 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 Springer Science+Business Media Singapore
About this paper
Cite this paper
Jauhar, S.K., Pant, M. (2016). Using Differential Evolution to Develop a Carbon-Integrated Model for Performance Evaluation and Selection of Sustainable Suppliers in Indian Automobile Supply Chain. In: Pant, M., Deep, K., Bansal, J., Nagar, A., Das, K. (eds) Proceedings of Fifth International Conference on Soft Computing for Problem Solving. Advances in Intelligent Systems and Computing, vol 437. Springer, Singapore. https://doi.org/10.1007/978-981-10-0451-3_47
Download citation
DOI: https://doi.org/10.1007/978-981-10-0451-3_47
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-10-0450-6
Online ISBN: 978-981-10-0451-3
eBook Packages: EngineeringEngineering (R0)