Abstract
In the recent years, the shift from vehicles fueled with fossil energy to electrically powered cars has notably gained momentum. The major challenge to be overcome is achieving competitive prices in spite of the high costs for traction batteries. Besides product and production process improvement a non-negligible, but often underestimated cost-factor can be found in logistics, since the production technology is not continuous yet and neither are the logistics systems.
This paper assesses possible methods to evaluate cost factors on different designs of load carrier systems. Moreover, the combination of cost factors for a particular scenario is not transparent due to numerous interdependencies. But as cost reduction is one of the goals for the simultaneous engineering process, the final decision for or against these scenarios is ultimately made from an economical perspective. Therefore, an evaluation model is necessary to assess cost criteria. Based upon the integrated product and process development a logistics development process is defined and a framework for a cost model to serve cost transparency is outlined. The results are validated by comparing the realization of cell electrodes without and with the established methodic approach.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Reference
B. Mayer, Lithium-ion race pics up, Autom. News Europe, Vol. 13, June 2008.
BMU, Konzept eines Programms zur Markteinführung von Elektrofahrzeugen, Berlin, September 2009, p.6.
M. Westermeier, G. Reinhart, T. Zeilinger, 2013, Method for quality parameter identification and classification in battery cell production, Electric Drives Prod. Conf. (EDPC), Nuremberg.
R. Ranzinger, 2013, Design of safe assembly processes for live working in traction battery series production, Electric Drives Prod. Conf. (EDPC), Nuremberg.
A. Kampker, H. Heimes, C. Sesterheim, M. Schmidt, 2013, Conception of Technology Chains in Battery Production, In: V Prabhu, M Taisch, D Kiritsis (Editors), Advances in Production Management Systems. Sustainable Production and Service Supply Chains, IFIP Advances in Information and Communication Technology, Vol. 414, 2013, pp.199-209.
J. Oser, 2007, Integrated Unit Load and Transport System Design in Manufacturing, In: IET Int. Conf. on Agile Manufacturing, ICAM 2007, Durham, pp. 119-123.
G. Pahl, W. Beitz., 2007, Engineering Design, 3. Edition, Springer London Ltd.
H. Warnecke, H.-J. Bullinger, R. Hichert, A. Voegele, 1996, Kostenrechnung für Ingenieure, 5. Auflage, Hanser-Verlag, München, pp.232-238.
F. Hull, P. Collins, J. Liker, 1996, Composlite Forms of Organization as a Strategy for Concurrent Engineering Effectiveness, IEEE Transactions on engineering management, Vol. 43, No. 2
J. Usher, U. Roy, H. Parsaei (Editors), 1998, Integrated Product and Process Development: Methods, Tools, and Technologies, John Wiley & Sons, p. IX
G. Schuh, W. Stölzle, F. Straube (Editors), 2008, Anlaufmanagement in der Automobilindustrie erfolgreich umsetzen, Springer, pp.1-5
T. Waggoner, 1995, Concurrent engineering strategies in electrical component manufacturing, Electrical Electronics Insulation Conference, 1995, and Electrical Manufacturing & Coil Winding Conference. Proceedings.
R. Winner, J. Pennell, H. Bertrand, M. Slusarczuk, 1988, The role of concurrent engineering in weapons system acquisition, Institute for Defense Analyses, Virginia.
A. Yassine et al., 1999, A Decision Analytic Framework for Evaluating Concurrent Engineering, IEEE Trans. On Eng. Management, Vol. 46, No. 2.
P. Thomes et al., Grundlagen, In: A Kampker, D Vallée, A Schnettler (Editors), 2013, Elektromobilität, Springer-Verlag, pp.5-58
M. Christopher, 2012, Logistics and Supply Chain Management, fourth edition, Prentice Hall, p.85
D. Ellström, J. Rehme, M. Björklund, H. Aronsson, 2012, Logistics Cost Management Models and Their Usability for Purchasing, Journal of Modern Accounting and Auditing, Vol. 8, No. 7.
Z. Bokor, 2012, Integrating Logistics Cost Calculation into Production Costing, Acta Polytechnica Hungarica, Vol. 9, No. 3.
A. Kampker et al., 2012, Process Alternatives in the Battery Production, Electrical Systems for Aircraft, Railway and Ship Propulsion (ESARS), 16-18 Oct. 2012.
Acknowledgement
The approach has been designed by the Chair of Production Engineering for E-Mobility Components (PEM) of RWTH Aachen University within the publicly funded research projects Lakobat (funded by the ZIEL2-programme) and E-Production (funded by the Federal Ministry of Education and Research (BMBF)).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2015 Springer International Publishing Switzerland
About this paper
Cite this paper
Kampker, A., Deutskens, C., Heimes, H.H., Ordung, M., Haunreiter, A. (2015). Cost model for an integrated load carrier design process in the lithium-ion battery production. In: Selvaraj, H., Zydek, D., Chmaj, G. (eds) Progress in Systems Engineering. Advances in Intelligent Systems and Computing, vol 366. Springer, Cham. https://doi.org/10.1007/978-3-319-08422-0_46
Download citation
DOI: https://doi.org/10.1007/978-3-319-08422-0_46
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-08421-3
Online ISBN: 978-3-319-08422-0
eBook Packages: EngineeringEngineering (R0)