Abstract
The transmission performance of two-tooth difference swing-rod movable teeth transmission system depends on the gear profile design. Based on the transmission principle of forward and inverse cam mechanism, tooth profile equations of wave generator and ring gear are deduced by setting the motion law of swing rod to realize the normalized design of tooth profile. Curvature radius of the ring gear tooth profile is derived. On this basis, by analyzing the relationship between amplitude coefficient and the curvature radius, the non-interference conditions of ring gear profile is obtained. And then the influence of amplitude coefficient on the transmission angle is analyzed. Thus, the amplitude coefficient range of the transmission system with good power transmission performance is obtained on the premise that the ring gear profile is free from interference under the given tooth profile parameters. This study provides a reference for the tooth profile design and parameter selection of the two-tooth difference swing-rod movable teeth transmission system.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Qu, J.F.: Theory of Movable Teeth Drive, 1st edn. China Machine Press, Beijing (1993). (In Chinese)
Yi, Y.L., Liu, P.P., An, Z.J., et al.: Tooth profile design and meshing characteristics analysis of any tooth-difference pure rolling movable tooth transmission. J. Mech. Eng. 52(11), 50–62 (2016)
Li, J.F., Zhao, H.W., Zhang, L.Y., et al.: Transmission and tooth profile equation of swing output movable teeth cam mechanism. J. Mech. Eng. 54(23), 23–31 (2018)
Han, L.S., Guo, F.: Global sensitivity analysis of transmission accuracy for RV-type cycloid-pin drive. J. Mech. Sci. Technol. 30(3), 1225–1231 (2016)
Li, X., Li, C.Y., Wang, Y.W., et al.: Analysis of a cycloid speed reducer considering tooth profile modification and clearance-fit output mechanism. J. Mech. Des. 138(3), 1–12 (2017)
Xun, C., Long, X.H., Hua, H.X.: Effects of random tooth profile errors on the dynamic behaviors of planetary gears. J. Sound Vib. 415, 91–110 (2018)
Tran, T.L., Pham, A.D., Ahn, H.J.: Lost motion analysis of one stage cycloid reducer considering tolerances. Int. J. Precis. Eng. Manuf. 17(8), 1009–1016 (2016)
Xu, L.X., Yang, Y.H.: Dynamic modeling and contact analysis of a cycloid-pin gear mechanism with a turning arm cylindrical roller bearing. Mech. Mach. Theory 104, 327–349 (2016)
Sheu, K.B., Chien, C.W., Chiou, S.T., et al.: Kinetostatic analysis of a roller drive. Mech. Mach. Theory 39(8), 819–837 (2004)
Liang, S.M., Zhou, J., Li, H.: Study on modal of two-tooth difference swing-rod movable teeth transmission based on thermal analysis. J. Sichuan Univ. (Eng. Sci. Ed.) 48(06), 99–104 (2016). (In Chinese)
Liang, S.M., Zhang, J., He, F.F.: Study on flash temperature of swing movable teeth transmission. J. Sichuan Univ. (Eng. Sci. Ed.) 45(02), 176–181 (2013). (In Chinese)
Zhao, C.K., Liang, S.M., Zhang, J.: Tooth profile analysis and simulation of the tow-tooth difference swing-rod movable teeth transmission. J. Sichuan Univ. (Eng. Sci. Ed.) 47, 151–157 (2015). (In Chinese)
Acknowledgment
This project is supported by the National Natural Science Foundation of China (No. 51605416), Colleges and Universities in Hebei Province Science and Technology Research Youth Fund (No. QN2016095), and Independent Research Program of the Young Teachers of Yanshan University (No.15LGA004).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Wei, R., Jin, H., Yi, Y. (2019). Design and Analysis of Gear Profile of Two-Tooth Difference Swing-Rod Movable Teeth Transmission System. In: Yu, H., Liu, J., Liu, L., Ju, Z., Liu, Y., Zhou, D. (eds) Intelligent Robotics and Applications. ICIRA 2019. Lecture Notes in Computer Science(), vol 11740. Springer, Cham. https://doi.org/10.1007/978-3-030-27526-6_54
Download citation
DOI: https://doi.org/10.1007/978-3-030-27526-6_54
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27525-9
Online ISBN: 978-3-030-27526-6
eBook Packages: Computer ScienceComputer Science (R0)