RTSP does not respond

[bunver]

Hi,
Thanks for such a good job!

Unfortunately, RTSP didn't work for me.

I'm able to access to FTP but when I try to access to RTSP via VLC player (rtsp://10.0.0.101:554/ch0_0.h264) it waits for 10 seconds in play mode, doesn't show any video just black screen and then stops.

Here is the log:

Starting to log...
[INIT] Your firmware version is:
2.0.0.1A_201612231003
[INIT] Killing original init.sh script.
[good] busybox 1.16.1 is in the system.
[good] rtsp2301 is in the system.
[good] rtsp2301_watch.sh is in the system.
Check for wifi configuration file...
/tmp/wpa_supplicant.conf /tmp/sd/test/wpa_supplicant.conf
Start wifi configuration...
Status for wifi configuration=0 (0 is ok)
Do network configuration 1/2 (IP and Gateway)
Done
Do network configuration 2/2 (DNS)
Done
Configuration is:
wlan0 Link encap:Ethernet HWaddr B0:D5:9D:A8:9D:E2
inet addr:10.0.0.101 Bcast:10.0.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2736 errors:0 dropped:12 overruns:0 frame:0
TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:607435 (593.1 KiB) TX bytes:4654 (4.5 KiB)

Get time from a NTP server...
Previous datetime is Thu Jan 1 00:00:33 CST 1970
Done
New datetime is Thu Jan 1 00:00:33 CST 1970
Starting telnet server...
Starting FTP server...
Starting RTSP server...
Processes after startup :
PID USER TIME COMMAND
1 root 0:00 init
2 root 0:00 [kthreadd]
3 root 0:00 [ksoftirqd/0]
4 root 0:00 [kworker/0:0]
5 root 0:00 [kworker/u:0]
6 root 0:00 [khelper]
7 root 0:00 [kworker/u:1]
88 root 0:00 [sync_supers]
90 root 0:00 [bdi-default]
91 root 0:00 [kintegrityd]
93 root 0:00 [kblockd]
103 root 0:00 [khubd]
105 root 0:00 [kusbotg]
199 root 0:00 [kswapd0]
251 root 0:00 [fsnotify_mark]
264 root 0:00 [crypto]
316 root 0:00 [romblock0]
319 root 0:00 [mtdblock0]
324 root 0:00 [romblock1]
327 root 0:00 [mtdblock1]
332 root 0:00 [romblock2]
335 root 0:00 [mtdblock2]
340 root 0:00 [romblock3]
343 root 0:00 [mtdblock3]
348 root 0:00 [romblock4]
351 root 0:00 [mtdblock4]
356 root 0:00 [romblock5]
359 root 0:00 [mtdblock5]
364 root 0:00 [romblock6]
367 root 0:00 [mtdblock6]
372 root 0:00 [romblock7]
375 root 0:00 [mtdblock7]
398 root 0:00 [cfinteractive]
403 root 0:00 [kworker/0:1]
404 root 0:00 [kworker/u:2]
412 root 0:00 [deferwq]
413 root 0:00 [jffs2_gcd_mtd4]
427 root 0:00 udevd --daemon
484 root 0:00 [kworker/u:3]
497 root 0:00 udevd --daemon
501 root 0:00 udevd --daemon
552 root 0:00 [mmcqd/1]
668 root 0:00 [jffs2_gcd_mtd5]
670 root 0:00 -sh
694 root 0:00 [flush-mtd-unmap]
695 root 0:00 [flush-31:2]
696 root 0:00 [flush-179:0]
705 root 0:00 {exe} ash /home/app/script/factory_test.sh
707 root 0:00 {factory_test.sh} /bin/sh /tmp/sd/test/factory_test.sh
785 root 0:00 [RtmpTimerTask]
786 root 0:00 [RtmpMlmeTask]
787 root 0:00 [RtmpCmdQTask]
788 root 0:00 [RtmpWscTask]
797 root 0:00 /home/base/tools/wpa_supplicant -c/tmp/wpa_supplicant.conf -g/var/run/wpa_supplicant-global -iwlan0 -B
874 root 0:00 /home/app/localbin/busybox ntpd -q -p 2.pool.ntp.org
1045 root 0:00 [hidog]
1049 root 0:00 /home/app/localbin/busybox telnetd
1052 root 0:00 /home/app/localbin/busybox tcpsvd -vE 0.0.0.0 21 /home/app/localbin/busybox ftpd -w /
1054 root 0:00 {rtsp2301_watch.} /bin/sh /home/app/localbin/rtsp2301_watch.sh
1058 root 0:00 ps
1060 root 0:00 /home/app/localbin/rtsp2301
1062 root 0:00 sleep 30
Storage status :
Filesystem 1024-blocks Used Available Use% Mounted on
/dev/root 1280 1124 156 88% /
tmpfs 15380 4 15376 0% /dev
/dev/mtdblock5 12992 8864 4128 68% /home
tmpfs 16384 12 16372 0% /tmp
/dev/mmcblk0p1 31248384 2816 31245568 0% /tmp/sd

Thanks for the help!

[xmflsct]

According to the log, your firmware version is higher than required. I will send you a firmware image later today for you to flash. After that, RTSP should be working.

[bunver]

Thanks, waiting for that!

[xmflsct]

@bunver here you are.
home_y20.zip

[bunver]

Thank you a lot @xmflsct ! Firmware successfully downgraded and I'm able to access RTSP streaming. Everything is fine.
Can I ask a favor? I need the function below like death2all110 did before,

Motion notifications

Optionally POST a JSON message of the status of motion detection to a URL

Values : URL to POST notification to, or leave empty to disable

MOTION_NOTIFICATION_URL=

is that possible?

[raymondlml]

Hi, I have the same problem but with the correct firmware. Can you please help to take a look to see what went wrong? Thanks!

Starting to log...
[INIT] Your firmware version is:
2.0.0.1A_201612051401
[INIT] Killing original init.sh script.
[good] busybox 1.16.1 is in the system.
[good] rtsp2301 is in the system.
[good] rtsp2301_watch.sh is in the system.
Check for wifi configuration file...
/tmp/wpa_supplicant.conf /tmp/sd/test/wpa_supplicant.conf
Start wifi configuration...
Status for wifi configuration=0 (0 is ok)
Do network configuration (DHCP)
Done
Configuration is:
wlan0 Link encap:Ethernet HWaddr 08:EA:40:8D:F7:BF
inet addr:192.168.11.11 Bcast:192.168.11.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1200 Metric:1
RX packets:139 errors:0 dropped:0 overruns:0 frame:0
TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:34340 (33.5 KiB) TX bytes:3502 (3.4 KiB)

Get time from a NTP server...
Previous datetime is Thu Jan 1 08:00:20 HKT 1970
Done
New datetime is Thu Jan 1 08:00:30 HKT 1970
Starting telnet server...
Starting FTP server...
Starting RTSP server...
Processes after startup :
PID USER TIME COMMAND
1 root 0:00 init
2 root 0:00 [kthreadd]
3 root 0:00 [ksoftirqd/0]
4 root 0:00 [kworker/0:0]
5 root 0:00 [kworker/u:0]
6 root 0:00 [khelper]
7 root 0:00 [kworker/u:1]
88 root 0:00 [sync_supers]
90 root 0:00 [bdi-default]
91 root 0:00 [kintegrityd]
93 root 0:00 [kblockd]
103 root 0:00 [khubd]
105 root 0:00 [kusbotg]
199 root 0:00 [kswapd0]
251 root 0:00 [fsnotify_mark]
264 root 0:00 [crypto]
316 root 0:00 [romblock0]
319 root 0:00 [mtdblock0]
324 root 0:00 [romblock1]
327 root 0:00 [mtdblock1]
332 root 0:00 [romblock2]
335 root 0:00 [mtdblock2]
340 root 0:00 [romblock3]
343 root 0:00 [mtdblock3]
348 root 0:00 [romblock4]
351 root 0:00 [mtdblock4]
356 root 0:00 [romblock5]
359 root 0:00 [mtdblock5]
364 root 0:00 [romblock6]
367 root 0:00 [mtdblock6]
372 root 0:00 [romblock7]
375 root 0:00 [mtdblock7]
398 root 0:00 [cfinteractive]
403 root 0:00 [kworker/0:1]
404 root 0:00 [kworker/u:2]
412 root 0:00 [deferwq]
413 root 0:00 [jffs2_gcd_mtd4]
427 root 0:00 udevd --daemon
477 root 0:00 udevd --daemon
484 root 0:00 [kworker/u:3]
490 root 0:00 udevd --daemon
548 root 0:00 [mmcqd/1]
667 root 0:00 [jffs2_gcd_mtd5]
669 root 0:00 -sh
693 root 0:00 [flush-mtd-unmap]
694 root 0:00 [flush-31:2]
695 root 0:00 [flush-179:0]
702 root 0:00 {exe} ash /home/app/script/factory_test.sh
704 root 0:00 {factory_test.sh} /bin/sh /tmp/sd/test/factory_test.sh
782 root 0:00 [RtmpTimerTask]
783 root 0:00 [RtmpMlmeTask]
784 root 0:00 [RtmpCmdQTask]
785 root 0:00 [RtmpWscTask]
794 root 0:00 /home/base/tools/wpa_supplicant -c/tmp/wpa_supplicant.conf -g/var/run/wpa_supplicant-global -iwlan0 -B
831 root 0:00 /sbin/udhcpc -i wlan0 -b -s /home/app/script/default.script
852 root 0:00 /home/app/localbin/busybox ntpd -q -p 0.nl.pool.ntp.org
1023 root 0:00 [hidog]
1027 root 0:00 /home/app/localbin/busybox telnetd
1030 root 0:00 /home/app/localbin/busybox tcpsvd -vE 0.0.0.0 21 /home/app/localbin/busybox ftpd -w /
1032 root 0:00 {rtsp2301_watch.} /bin/sh /home/app/localbin/rtsp2301_watch.sh
1036 root 0:00 ps
1038 root 0:00 /home/app/localbin/rtsp2301
1040 root 0:00 sleep 30
Storage status :
Filesystem 1024-blocks Used Available Use% Mounted on
/dev/root 1280 1088 192 85% /
tmpfs 15380 4 15376 0% /dev
/dev/mtdblock5 12992 9652 3340 74% /home
tmpfs 16384 28 16356 0% /tmp
/dev/mmcblk0p1 7740164 2456 7737708 0% /tmp/sd